Wall-Mounted IPX1/IPX2 Dripping Water Test Apparatus Manufacturer – BONAD IP Testing Equipment
Product Introduction
The IPX1 IPX2 dripping water test apparatus simulates controlled dripping water falling vertically (IPX1) or at a 15° inclination (IPX2) onto test specimens. Water flow rate, drip area, and test duration are precisely controlled to ensure repeatable and standard-compliant results.
The system can be installed as a ceiling-mounted or wall-mounted structure, making it suitable for laboratories with limited floor space.
Appliance
IPX1 and IPX2 testing are part of the Ingress Protection (IP) code, which classifies and rates the degree of protection provided against the intrusion of solid objects and water into electrical enclosures and mechanical casings. The IP code is internationally recognized and defined in the IEC 60529 standard.
These tests are commonly applied to products such as outdoor electrical equipment, luminaires, and enclosures that need to demonstrate a degree of protection against water ingress according to international standards and regulations.
Key Features
- Fully compliant with IEC 60529 IPX1 & IPX2.
- Adjustable dripping height and test duration.
- Uniform water distribution through calibrated drip nozzles.
- IPX2 testing with 15° inclined rotating platform.
- Stable stainless steel structure for long-term use.
- Optional flow control system and water recycling design.
- Customizable drip area size based on specimen dimensions.
Technology parameter:
| model | BND-IPX12C-800 | BND-IPX12C-1000 | BND-IPX12C-1200 |
| Drop of rain area | 800*800mm(can customize) | 1000*1000mm(can customize) | 1200*1200mm(can customize) |
| Equipment outer dimensions | L1000*D1000*H2500mm | L1200*D1200*H2500mm | L1450*D1450*H2600mm |
| Turntable diameter | ￠500 mm | ￠600 mm | ￠600 mm |
| Dripping aperture | ￠0.4mm | ||
| The distance between holes | 20*20 mm | ||
| Rainfall | 1-5mm/Min(±0.5mm/min) | ||
| Flow adjustment mode | manual setting | ||
| Drop of rain tank lifting height | 1000*1800 adjustable | ||
| Turntable bearing | 50KG | ||
| Turntable Speed | 1 r/min | ||
| Turntable Adjustable Incline | 0° or 15° | ||
| Turntable lifting range | Fixed | ||
| Testing time | 0-999 min | ||
| Protective device | Leakage, water shortage, short circuit | ||
| Power (V) | 220V | ||
| Power (KW) | 1 | ||
| Standards compliant | IEC60529（IPX1 IPX2) | ||
IPX1 and IPX2 Test Method Explanation
IPX1 – Vertical Dripping Water Test
- Simulates vertically falling water droplets.
- Test duration: 10 minutes.
- Applicable to products exposed to condensation or light dripping environments.
IPX2 – Inclined Dripping Water Test
- Dripping water at 15° tilt.
- Test duration: 10 minutes (2.5 minutes per position).
- Evaluates enclosure protection when tilted during operation.
Why Choose BONAD IPX1 / IPX2 Test Equipment
- Direct Manufacturer: In-house design and production ensure quality consistency.
- Standard Accuracy: Fully aligned with IEC 60529 test requirements.
- Flexible Customization: Test area, structure, and controls can be tailored.
- Global Support: Equipment supplied worldwide with technical guidance.
- Multiple models: We offer various models suitable for different testing environments, such as the frame-type IPX1/2 drip tester.
FAQ:
1. What is the main difference between IPX1 testing and IPX2 testing?
The primary distinction between IPX1 and IPX2 lies in the direction of water application. IPX1 tests for protection against vertically falling water drops, while IPX2 tests for protection against water droplets at an angle up to 15 degrees from the vertical. Both tests assess the ability of the enclosure or casing to resist water ingress and provide a degree of protection as specified in the IP code standard.
2. What does IPX2 waterproof mean?
IPX2 waterproof refers to the level of protection an object or device provides against water ingress from water droplets at an angle up to 15 degrees from the vertical direction. The “IP” in IPX2 stands for Ingress Protection, and the “2” indicates the specific level of protection against water.
3. Is your IPX1 IPX2 test equipment for both IPX1 and IPX2 testing?
Yes. Our product is for both IPX1 AND IPX2 testing. You could adjust the flow rate and tilt angle based on your aims.
4. What is your lead time for IPX1 IPX2 test equipment?
Around 25~30 working days.
5. Could you recommend me the right model for my product to be tested?
Yes. Send us the specifications, such as size and weight of your samples.
6. Are you able to provide OEM or ODM services?
Yes. Contact us for details.
