IPX3 IPX4 Rain Box Standard
In accordance with IEC 60529: 2001 "Degrees of protection provided by enclosures (IP Code)"
|
IP code |
Protection against |
Effective against |
Details |
|
3 |
Spraying water |
Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect, utilizing either: a) an oscillating fixture, or b) A spray nozzle with a counterbalanced shield. Test a) is conducted for 5 minutes, then repeated with the specimen rotated horizontally by 90° for the second 5-minute test. Test b) is conducted (with shield in place) for 5 minutes minimum. |
For an oscillating tube: Test duration: 10 minutes Water Volume: 0.07 l/min per hole |
|
4 |
Splashing of water |
Water splashing against the enclosure from any direction shall have no harmful effect, utilizing either: a) an oscillating fixture, or b) A spray nozzle with no shield. Test a) is conducted for 10 minutes. Test b) is conducted (without shield) for 5 minutes minimum. |
Oscillating tube: Test duration: 10 minutes, or spray nozzle (same as IPX3 spray nozzle with the shield removed) |
Product Features
1.Versatile Testing: Our IPX3 and IPX4 Test Chamber allows you to conduct both IPX3 and IPX4 tests, providing comprehensive evaluation of your products' resistance to water ingress.
2.Precise Simulation: The chamber accurately replicates water spray and splashing conditions, allowing you to assess the potential effects of these conditions on your product's performance.
3.Adjustable Parameters: With adjustable water flow rates, angle of water spray, and test duration, our test chamber enables you to customize the test conditions to meet your specific requirements.
4.Reliable Construction: The chamber is constructed using high-quality materials that are resistant to water corrosion, ensuring its long-term durability and reliability.
5.Easy Operation: The intuitive control panel and user-friendly interface make it simple to set up and operate the test chamber.
6.Accurate Measurement: Equipped with precise measuring instruments, the chamber provides accurate readings of the testing, ensuring reliable results.
7.Safety Features: The test chamber incorporates safety measures to protect operators and ensure the safe operation of the equipment, including emergency stop buttons and leakage protection.
Product Introduction
This test chamber is specifically engineered to simulate and evaluate the resistance of your products against water spray and splashes , ensuring their durability and performance in various environmental conditions. It is an essential tool for manufacturers, quality control departments, and research laboratories.
Appliance
Our IPX3 and IPX4 Test Chamber is suitable for a wide range of industries and products, including electronics, automotive components, lighting fixtures, household appliances, outdoor equipment, and more. It helps you assess the ingress protection capabilities of your products, ensuring compliance with industry standards and regulations.
Technology parameter
|
No. |
Model |
BND-IPX34B-R200 |
BND-IPX34B-R400 |
BND-IPX34B-R600 |
|
1 |
Swing pipe size (mm) |
R200 |
R400 |
R600 |
|
2 |
Inner dimensions (mm) |
L500*D500*H500mm |
L900*D900*H900mm |
L1300*D1300*H1300mm |
|
3 |
Outer size(mm) |
L1000*D680*H1440mm |
L1400*D1080*H1900mm |
L1740*D1480*H1950mm |
|
4 |
Flow (L / mm)) |
0-1L/Min |
0-2L/Min |
0-3L/Min |
|
5 |
Turntable Size (mm) |
￠200 |
￠400(can add ￠200) |
￠600(can add ￠400,￠200) |
|
6 |
Turntable height adjustable range |
150-250 mm |
350-600mm |
550-1000mm |
|
7 |
Spray aperture diameter (mm) |
0.4 |
||
|
8 |
swing pipe inner diameter (mm) |
15 |
||
|
9 |
Swing angle |
120°(IPX3), 350°(IPX4), or customize |
||
|
10 |
Swing speed |
120°(to and fro) 4S、360°(to and fro) 12S(accurate control)or customize |
||
|
11 |
Swing pipe material |
SUS304 stainless steel |
||
|
12 |
Turntable speed |
1-5r/min(accurate control) |
||
|
13 |
protective device |
Leakage, water shortage, short circuit |
||
|
14 |
Power supply (V) |
220V |
||
|
15 |
Power（KW） |
1 |
||
|
16 |
Standards |
IEC60529:1989+A1（IPX3、IPX4) |
||
FAQ
1. Are this chamber for both IPX3 and IPX4 testing?
Yes. One chamber for two tests.
2. What is the lead time?
Around 30~35 days.
3.How will you pack it?
We pack it by protection film and plywood cases to ensure transportation safety and avoid damage.
