EN50075 Figure 7 Plug Gauge
Product Description
Arrangement for compression test
a steel base;
a steel plate;
and a weight of 150N.
1. Application:
This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to EN 50075 ( BS EN 50075:1991 ) standards. And the mainly application industries is electronics, electrical appliances, plugs and sockets and other similar areas.
2. Features:
Gauge dimensions, tolerances, material, hardness, surface roughness conform to the standards requirements;
Material hardness is more than 50HRC;Material thermal expansion coefficient is small,dimensions and tolerances is stable and reliable.
EN50075 test devices list:
|
Product name |
Standard |
|
|
1 |
Gauge for pin diameter |
EN50075-Fig1-GO |
|
2 |
Gauge for pin diameter |
EN50075-Fig1-NotGO |
|
3 |
Gauge for interchangeability |
EN50075-Fig2 |
|
4 |
Standard test finger |
EN50075-Fig3 |
|
5 |
Gauge for checking impossibility of single-pole insertion of plugs into socket-outlets |
EN50075-Fig4 |
|
6 |
Apparatus for testing cord retention to the accessory |
EN50075-Fig5 |
|
7 |
Arrangement for compression test |
EN50075-Fig7 |
|
8 |
Tumbling barrel |
EN50075-Fig8 |
|
9 |
Apparatus for abrasion test on insulation sleeves of plug pin |
EN50075-Fig9 |
|
10 |
Apparatus for compression test for the verification of resistance to heat |
EN50075-Fig10 |
