Electrostatic Discharge (ESD) Generator – BONAD ESD Test Generator
Compliant Standards
The BND-ESD30 simulator supports international and military standards, including but not limited to:
- IEC / EN / GB Standards:
IEC 61000-4-2, GB/T 17626.2, GB/T 19951, IEC 61000-6-1/2, IEC 61326, IEC 61340-3-1, EN 61000-6-1/2, EN 61326 - Military and Industry Standards:
MIL-STD-750, MIL-STD-883E/F, GJB 128A, GJB 548A, GJB 1649, ISO 10605 - Telecom and Semiconductor Standards:
ITU-T K.20, Bellcore GR-1089-CORE, ANSI/ESD STM5.1/5.2, JEDEC EIA/JESD22, IBC 747-1
Test Purpose:
To simulate electrostatic discharge from human body or conductive objects, assessing the anti-interference capability and damage resistance of electronic devices.
Applications
The ESD Simulator is widely used in the testing and verification of:
- Consumer electronics and communication devices
- Automotive electronics and control systems
- Semiconductor components and PCBs
- Industrial control equipment and power modules
- Medical, aerospace, and defense electronics
By simulating static discharge events, it ensures product compliance and robustness under real-world electrostatic interference conditions.
Key Features
- Fully compliant with IEC 61000-4-2, with discharge up to 30kV
- Interchangeable RC modules: IEC, HBM (Human Body Model), and MM (Machine Model) modes
- Advanced test functions: automatic trigger, voltage ramp scanning, polarity switching, programmable discharge modes
- Stable discharge performance: maintains consistent air discharge voltage for >5s
- Compact & lightweight design (~4kg), ergonomic and portable
- Precision discharge: minimal humidity influence and high repeatability
- Low-radiation ESD gun for operator safety and comfort
- High reliability: imported core components, low failure rate, and long-term stability
- High cost-performance ratio, ideal for laboratories and manufacturers
Technical Parameters:
| Parameter | Specification |
| Output Voltage | 0.1–30.0 kV ±5% |
| Polarity | Positive/Negative/Alternating |
| Trigger Modes | SINGLE / COUNT (1–9999) / 20 pps (20 discharges/sec) |
| Discharge Modes | Contact / Air Gap |
| Discharge Interval | 0.05–9.99 s (0.05 s in 20 pps mode) |
| Current Rise Time | 0.6–1 ns |
| Voltage Hold Time (Air Discharge) | >5 s |
| RC Modules | Values |
| IEC Mode (Standard) | 150 pF ±10%, 330 Ω ±10% |
| HBM Mode (Optional) | 100 pF ±10%, 1500 Ω ±10% |
| MM Mode (Optional) | 200 pF ±10%, 0 Ω ±10% |
| ISO 10605 (Automotive, Optional) | 330 pF ±10%, 2000 Ω ±10% |
| Discharge Electrodes | Conical (Contact) / Spherical (Air Gap) |
| Operating Environment | 10–35°C, 30–60% RH |
| Power Supply | AC 85–265 V, 50/60 Hz |
| Weight | ~4 kg |
Standard ESD Test Environment (ESDD Setup)
To ensure repeatability and comparability, tests are performed in a standardized ESD environment designed per IEC 61000-4-2:
| Component | Specification |
|---|---|
| Test Wooden Table | 1600×800×800 mm (metal-free) |
| Reference Ground Plate | 2600×1700×1.0 mm (stainless steel) |
| Horizontal Coupling Plate | 1600×800×1.0 mm (stainless steel) |
| Vertical Coupling Plate | 500×500×1.0 mm (stainless steel) |
| Insulating Mat | 1400×600×0.5 mm |
| Grounding Cables | 470 kΩ × 2 – 3 pcs |
| ESD Brush | 1 pc |
Also compatible with EFT/Burst and Damped Oscillatory Wave testing for multi-function immunity validation.
Why Choose BND-ESD30
- Comprehensive compliance with global standards
- Designed for precision, repeatability, and ease of use
- Applicable for research, certification, and production line testing
- Supports future-proof ESD testing up to 30kV
- Backed by BONAD’s reliability and calibration expertise
