UL PA160 Unjointed Rigid Test Probe

UL PA160 Unjointed Rigid Test Probe Model#BND-PA160A Introduction 1,The rotor of a motor, a pulley, a belt, a gear, a fan, or other moving parts shall be enclosed or guarded to reduce the risk of injury to persons. 2,A fan blade shall be constructed of a material and in such a manner to reduce...

Send InquiryChat Now
Product Details

UL PA160 Unjointed Rigid Test Probe

Model#BND-PA160A


Introduction

1,The rotor of a motor, a pulley, a belt, a gear, a fan, or other moving parts shall be enclosed or guarded to reduce the risk of injury to persons.

2,A fan blade shall be constructed of a material and in such a manner to reduce the risk of its breakage or its release of parts that could cause a risk of injury to persons.

3,The portion of a fan blade that can cause a risk of injury to persons shall be guarded so that the probe shown in Figure 9.1 cannot touch the part when inserted with a force of 1 lb (4.4 N) through any opening in the guard.

Exception: This requirement does not apply to a part or portion of a part that must be exposed to enable a heater to perform its intended function


Technical Parameters:

Total Length :88.9mm(3.5 inch)

Head Length :25.4mm(1 inch)

Head Radius: R 3.2mm(1/8 inch)

Former Head Diameter:12.7mm(1/2 inch)

Tail Diameter :25.4mm(1 inch)

Reference standards:   UL1278 figure 9.1 (PA160)


Schematic:

image001.jpg


Product Show


image002.jpg

image004.jpg


FAQ

1.What’s the shipping way?
Via air , sea or express like DHL, UPC, TNT, FedEx and so on.

2.What’s your after-sales service policy?
One year warranty and life long tech support.


3.Can I book a factory tour?

Yes. Please contact us to arrange it.


4.What’s your working hours?

8:30~12:00  13:30~18:00 (from Monday to Friday)


5.Can I get a sample from you?

Currently we don’t  provide free samples, but you can get a paid one.





Hot Tags: ul pa160 unjointed rigid test probe, China, manufacturers, suppliers, factory, buy, made in China
Inquiry