IEC61032 Accessibility Probe Jointed Test Finger With 125mm Dam Board

IEC61032 Accessibility Probe Jointed Test Finger With 125mm Dam Board

IEC61032 Accessibility Probe Jointed Test Finger with 125mm dam board Product Description IEC61032 Accessibility Probe Jointed Test Finger with 125mm dam board Parameter: 1,Nodular Finger Length:100mm(30/30/40mm); 2,Dam-board Diameter:125mm; 3,Standard:IEC60335-2-14|EN60335-2-14|GB4706.30...

Send InquiryChat Now
Product Details

IEC61032 Accessibility Probe Jointed Test Finger with 125mm dam board



Product Description

IEC61032 Accessibility Probe Jointed Test Finger with 125mm dam board

 

Parameter:

1,Nodular Finger Length:100mm(30/30/40mm);

2,Dam-board Diameter:125mm;

3,Standard:IEC60335-2-14|EN60335-2-14|GB4706.30 IEC60335-2-14|EN60335-2-14

 

Appliance:

This test probe similar to that of test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm.


Introduction: 

Jointed Test finger probe meets the standard requirements of IEC61032. The Test Probe is a wide range of probes to meet the most common standards including those from IEC, EN, UL, GB, and others. Such standards require the checking of accessibility to dangerous parts of home electronics and appliances, toys, tools, and a host of other products that are intended to be protected by enclosures. These probes simulate human fingers, tools, and other items that would be hazardous to come in contact with certain parts of products.



125mm弯指.jpg



Company Information

 trade info


Hot Tags: iec61032 accessibility probe jointed test finger with 125mm dam board, China, manufacturers, suppliers, factory, buy, made in China
Inquiry