Textile Fabrics Burning Behavior Tester
ISO6940 ISO6941Textile Fabrics Burning Behavior Tester Introduction Model# BND-LLY07H 1.1 BND-LLY07H Type multifunction textile fabrics burning behavior tester is mainly used to determine the continued burning, smoldering and carbonization tendencies of textile fabrics, which applies to textile...
ISO6940 ISO6941Textile Fabrics Burning Behavior Tester
1.1 BND-LLY07H Type multifunction textile fabrics burning behavior tester is mainly used to determine the continued burning, smoldering and carbonization tendencies of textile fabrics, which applies to textile fabrics and industrial products in the form of single or multi-component fabrics( woven, knitted, coated and quilted ).
1.2 It conforms to:ISO6940,ISO6941,EN532…
Main Technical Parameters
2.1 Time Setting: 0.1s~99.9s
2.2 Timing Accuracy: 0.1s
2.3 Flame Height: adjustable
2.4 Specimen Dimensions: 560mm×170mm,70mm×190mm,150mm×190mm
2.5 Power Supply: AC220V±10% 50Hz
2.8 Input pressure of supplied gas should be within 15kPa~20kPa.
3.1 Kindly check the parts of the equipment in case of the fall off, loose, deformation during transportation.
3.2 The instrument should be installed in a well-ventilated fume hood for the timely removal of smoke generated during the test.
3.3 To ensure the rubber tube connected the air supply to the instrument should be solid and reliable, not loose leakage for safety.
3.4 The instrument must be grounded reliably. Be reminded that the ground wire to be installed separately.
3.5 Operation environment: temperature 20℃±15℃,relative humidity <85%.No corrosive media, combustible gases and conductive dust surround.
3.6 The front door of the equipment must be opened at the time of ignition to prevent gas deflagration.
3.7 The tester is equipped with a flame height pointer for easy adjustment.
3.8 The main gas supply and power supply must be switched off after the end of the test.
3.9 Strictly follow the instructions of this manual. The maintenance is by professional technical personnel.
1.What’s your MOQ?
MOQ for most of our products is 1 unit. If you purchase more products, you will get a better price accordingly.
2.Do you have an OEM/OED service?
Yes! Please contact us for details
3.What’s the lead time?
It depends on the product and the qty.
If it is in stock, 3~7 days will be taken. Normally, 1~2 weeks for most products. 4~7 or more weeks will be needed for complex ones.
Please contact us to confirm.
4.What’s the payment term?
T/T, Western Union, Money gram ,PayPal ,etc .
5.What’s the shipping way?
Via air , sea or express like DHL, UPC, TNT, FedEx and so on.