The IP grade waterproof test equipment is used to check the shell and seal of electric and electronic products after water test, or whether it can guarantee the good performance and technical state of the equipment and components during the test.
1, pendulum swing: through the stepper motor, PLC (imported) drive reducer, through programmable logic controller set automatic completion;
2, the worktable rotates: the motor drives the turbine to decelerate and rotates, so as to achieve the rotating speed of the worktable.
3, nozzle: according to the size of the specimen, determine the bending radius of the tube. The nozzle is a detachable special nozzle, and the nozzle can be replaced at any time according to the standard required aperture, so that the ejected water droplets are uniform and the flow is sufficient.
4, waterway: the open swing pipe must be drained when it is raining, so it should be considered in civil construction, so that it can discharge quickly and do not accumulate water.
Next: No Information
- How To Save Energy And Save Electricity From Th...
- Energy Saving Control Of Constant Temperature A...
- What Are The Textile Machinery And Equipment
- IP Protection Grade Test
- The Importance Of The Waterproof Test Equipment
- Thrust Test Probe Parameters And Methods Of Use
- Application Of Soil Sensor
- What Are The Testing Items For The Plug And Soc...
- How To Choose The Correct Fuse For The Tester
- Correct Selection And Use Of Various Environmen...