Vertical Drop Rain Test Chamber

Vertical Drop Rain Test Chamber

IPX12 Vertical Drip Rain Test Chamber Model#BND-IPX12A Introduction: IPX12 vertical water drip test chamber is mainly used to test the physical and other related properties of the products in the environment of simulated rain, such as electronic and electrical products, lamps, electrical...

Send InquiryChat Now
Product Details

IPX12 Vertical Drip Rain Test Chamber

Model#BND-IPX12A


Introduction:

IPX12 vertical water drip test chamber is mainly used to test the physical and other related properties of the products in the environment of simulated rain, such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and components.

After the test, through the test result to determine whether the performance of products meet the requirements in order to facilitate product design, improvement, testing and factory inspection.

 

Standard:

According to IEC60529: Degrees of protection provided by enclosures(IP Code)

 

IP code

Protection against

Effective against

Details

IPX1

Dripping water

Dripping water (vertically falling drops) shall have no harmful effect on the specimen when mounted in an upright position onto a turntable and rotated at 1 RPM.

Test duration: 10 minutes

Water equivalent to 1 mm rainfall per minute

IPX2

Dripping water when tilted at 15°

Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle of 15° from its normal position. A total of four positions are tested within two axes.

Test duration: 2.5 minutes for every direction of tilt (10 minutes total)

Water equivalent to 3 mm rainfall per minute


Dripping water chamber Features:

BND-IPX12A Waterproof  test chamber is a space-saving option.
1 This equipment is suitable for the waterproof testing of IPX1, IPX2
2 inner box and turntable all made by SUS304 # stainless steel plate , to ensure it dose not rust after long-term use.

3 Pendulum tube drive use domestic high-quality stepper motor, swing tube angle, swing tube speed, turntable speed and other parameters can be set and displayed on the touch screen, swing tube speed and angle precision adjustable.

4 Pendulum flow and pressure are manually adjustable on the panel .

5 Pendulum pipe water supply line is equipped with a filter, can filter impurities in water, effectively prevent the nozzle tube clogging.

6 Water into the water tank automatically controlled by the float valve water ,Pump selection of domestic brands  stainless steel self-priming pump ,The water tank is made of high quality SUS304 # stainless steel welded together, the pipeline is made with domestic famous brand, and the water pipe is made of stainless steel, which is made of domestic famous brand (Guangzhou The entire waterway is made of high-quality SUS304 # stainless steel and PVC material, to prevent pipe rust, affect the test results.

7 Turntable using domestic high-quality stepper motor, speed and angle can be set on the touch screen. 

8 7-inch touch screen + Panasonic PLC, electrical components used such as LG, Omron and other imported brands, wiring process in line with national standards

9 The drip box is made of stainless steel with high-rust-proof design, nozzle contact position using a brass conical design, convenient and timely replacement and replacement of the needle.

 

Technical parameters:

No

Model

BND-IPX12A-600

1

Driping rain area

600*600 mm

2

inner box size

L800*D800*H1000mm

3

External dimension

About 1250*1000*1750mm

4

Turntable diameter

600 mm

5

Turntable bearing

50KG

6

Turntable lifting range

350-700 mm

7

Drip pore size

0.4mm.

8

Distance between holes

20*20 mm

9

Rainfall

1-5 mm/min(±0.5mm/min)

10

Traffic adjustment method

Manual adjustment

11

Drop the height of the lifting gear

Fixed

12

Turntable speed

1 r/min

13

Turntable tilt

0°or 15°

14

Test time

0-999 min

15

Protector

Leakage, water shortage, short circuit

16

Power supply(V)

220V

17

power(KW)

1.0

18

Standard

IEC60529:1989


Picture Show

QQ截图20180125092450.jpg


FAQ

1.What’s your MOQ?
MOQ for most of our products is 1 unit. If you purchase more products, you will get a better price accordingly.


2.Do you have an OEM/OED service?
Yes! Please contact us for details


3.What’s the lead time?
It depends on the product and the qty.
If it is in stock, 3~7 days will be taken. Normally, 1~2 weeks for most products. 4~7 or more weeks will be needed for complex ones.
Please contact us to confirm.


4.What’s the payment term?
T/T, Western Union, Money gram ,PayPal ,etc .


5.What’s the shipping way?
Via air , sea or express like DHL, UPC, TNT, FedEx and so on.


Hot Tags: vertical drop rain test chamber, China, manufacturers, suppliers, factory, buy, made in China
Inquiry