Stainless Steel Water Jets Hose Nozzle
IPX5 IPX6 Stainless Steel Water Jets Hose Nozzle Introduction: Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle. Standard: According to IEC60529: Degrees of protection provided...
IPX5 IPX6 Stainless Steel Water Jets Hose Nozzle
Test Set consists of a jet handle that is equipped with a pressure gauge and an easy-to-adjust flow valve. The interchangeable nozzles assemble easily to the jet handle.
According to IEC60529: Degrees of protection provided by enclosures(IP Code X5 and X6)
Figure 6 – Test device to verify protection against water jets (hose nozzle)
• Internal diameter of the nozzle:6.3mm
• Delivery rate:12.5/min+/- 5%
• Water pressure: to be adjusted to achieve the specified delivery rate
• Core of the substantial stream: circle of approximately 40mm diameter at 2.5 distance from nozzle
• Test duration per square meter of enclosure surface area likely to be sprayed :1mm
• Minimum test duration :3min
• Distance from nozzle to enclosure surface:between2.5 and 3m
0 - 1.6 bar
6.3mm(IPX5) ; 12.5mm(IPX6)
Stainless steel nozzle
IEC60529 IPX5 IPX6, IEC60598-1
1.Who do you serve?
The markets we serve include: information technology, medical, RF/wireless, telecommunications, industrial, consumer and manufacturing, universities, academies and institutes. Our products are popular all over the world. Our customers are from USA, Russia, Japan, Indonesia, Brazil, South Africa, Korea, Malaysia, Australia , UK, Italy, etc.
2.What’s your quality control system?
We have perfect products quality control system
Pre-production quality control. Row materials is provided by quality suppliers and some of parts are imported from Germany, USA and Japan, which ensure the good quality at the source. Meanwhile, we will test the materials and parts before mass production.
Mid-production quality control. Our QC team will work through the whole production process.
Acceptance test. Each instruments must be carried out 100% quality examination before the shipment.
3.Do you own any factories?
Bonad owns its factories and provides with all kinds of OEM/ODM services.
4.Do you have any suggestions on payment?
Yes. To save the bank charge, we suggest to pay via PayPal for small amount and T/T for large sums.
5.Can I get a certificate of calibration(CNAS)?
Yes. But it’s for an extra charge.