Powerful Water Jet Test Equipment
IPX56 Powerful Water Jet Test Equipment Model#BND-IPX56A Introduction: Tests for ratings IPX5 and IPX6 address ingress from a jetting water stream Tests for these ratings are conducted using a Jet Nozzle Kit. Testing to IPX6 also requires a water tank and a high pressure water source. IPX56...
IPX56 Powerful Water Jet Test Equipment
Tests for ratings IPX5 and IPX6 address ingress from a jetting water stream Tests for these ratings are conducted using a Jet Nozzle Kit. Testing to IPX6 also requires a water tank and a high pressure water source. IPX56 powerful water Jet test equipment is designed according to IEC60529 (also EN 60529) liquid ingress protection IPX5 and IPX6, which is mainly used for testing the resistibility of electro-technical products against water and determining IP protection types.
Many products and components need an IP rating. In the US, Canada and Mexico an increasing number of UL and CSA standards are requiring IP ratings, information technology equipment, laboratory equipment, electrical medical equipment and light fixtures to name a few. In addition, the European CE mark system requires suitable IP ratings for products, as do all foreign countries outside the EU.
Examples of products that need IP ratings include outdoor products, off-the-shelf enclosures, ,moisture resistant products, damp location products, as well as their critical components.
This vertically falling water Drops equipment fully meets the IP protection grade IPX5 water jets test and IPX6 power water jets test from IEC60529
Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.
Test duration: 1 minute per square meter for at least 15 minutes
Powerful water jets
Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects.
Test duration: 1 minute per square meter for at least 3 minutes
• Test room made of corrosion-resistant steel
• The electrical parts of the turntable are well-sealed so as to avoid electrical hazards caused by water
• The turntable rotates clockwise alternating with anticlockwise, which is convenient to a electric specimen.
• Water jet testing time is controlled by a time relay, which is easy to operate and service
• Built-in water tank with flow control valve and low water level alarm.
• IPX5 water jet test and IPX6 powerful water jet test mode could be switched with the dedicated button.
•Automatic shutdown after the water proof test.
（touch-tone）Time relay + switch
Equipment Outer size
L1000 * D800 * H1300mm (including casters）
Water tank capacity
550L, 800 × 600 × 1145 (mm), 304 stainless steel
IPX5 water aperture
IPX5:6.3mm ; IPX6:12.5mm
IPX5 water flow
12.5±0.625L / min
IPX6 water flow
Prescribed water flow regulator(Mpa)
Using band regulating flow meter
2.5*3m (test personnel Control)
Stainless steel + PPR pipe welding
Turntable load power
Leakage, water shortage, short circuit
1.What’s the lead time?
It depends on the product and the qty.
If it is in stock, 3~7 days will be taken. Normally, 1~2 weeks for most products. 4~7 or more weeks will be needed for complex ones.
Please contact us to confirm.
2.What’s the payment term?
T/T, Western Union, Money gram ,PayPal ,etc .
3.What’s the shipping way?
Via air , sea or express like DHL, UPC, TNT, FedEx and so on.
4.What’s your after-sales service policy?
One year warranty and life long tech support.
5.Can I book a factory tour?
Yes. Please contact us to arrange it.