Needle Flame Testing Equipment
Needle Flame Flammability Testing Equipment (Model#BND-ZY) Introduction: Needle Flame tester specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material's ignition risk and fire retardance by a...
Needle Flame Flammability Testing Equipment
Introduction: Needle Flame tester specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess product and material's ignition risk and fire retardance by a simulation technique .
A 12 mm high flame held at a 45° angle is applied to the base of a test specimen for a specified period of time. Tissue paper is laid out 200 mm beneath the test specimen (alternatively materials that would normally surround the test material in application may be laid out in place of tissue paper to measure the effect of the test material on surrounding materials).
The test specimen is arranged in a vertical position over tissue paper. A propane gas flame is applied to the edge as well as to the flat surface. The burning time, flammability and severity (exposure time) are determined for this flame application. The test is usually performed on parts or selected areas of these parts.
Standard: IEC60695-11-5: Fire hazard testing. Part 11-5: Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance
Application: Needle-flame Tester could be applicable to ignition hazard test, combustibility test of electronic industry, home electronic appliance and materials.
Needle-flame Tester’s crust and important parts are made by Stainless Steel, Sculpt daintily, endure smoke corrupt, high automatism, high reliability of key parts of apparatus, numeric shows. Fixture could be adjusted. Test procedure could be controlled automatically which is convenience and reliable.
the hole Φ 0.5mm ± 0.1mm, outside diameter ≤ Φ 0.9mm, length ≥35mm,
Needle Flame Burner Angle
tilt 45 ° (test) or vertical (adjust the flame height)
0-999 .9 s ± 0.1s adjustable (normally choose to 30s)
0-999 .9 s ± 0.1s, auto record, manual suspension
Needle Flame Height
12mm ± 1mm (with a height measurement apparatus)
95% of the butane gas (Pressure:Less than 0.2MP)
Temperature Measurement range
0 ~ 1000 ℃
Needle Flame Temperature Requirements
from 100 ℃ ± 2 ℃ 700 ℃ ± 3 ℃ rise to the time in 23.5 seconds ± 1 seconds
Φ0.5mm (K type)
0.5 cubic meters, stainless steel chassis
1000mm wide × 650mm deep × 1300mm high
AC220V ± 5%, 5
1.What’s your MOQ?
MOQ for most of our products is 1 unit. If you purchase more products, you will get a better price accordingly.
2.Do you have an OEM/OED service?
Yes! Please contact us for details
3.What’s the lead time?
It depends on the product and the qty.
If it is in stock, 3~7 days will be taken. Normally, 1~2 weeks for most products. 4~7 or more weeks will be needed for complex ones.
Please contact us to confirm.
4.What’s your working hours?
8:30~12:00 13:30~18:00 (from Monday to Friday)
5.Can I get a sample from you?
Currently we don’t provide free samples, but you can get a paid one.