Glow Wire Test Equipment

Glow Wire Test Equipment

Glow wire test equipment Test standard: The tester comforms to IEC6069 5-2-10, UL 746A, GB/T5169.10, GB4706.1 Application: The glow wire tester heat the stipulated material, Ni80/Cr20, and heating wire, nichrome wire with diameter of 4 mm with high current up to test temperature 550 oC ~ 960 oC....

Send InquiryChat Now
Product Details

                                                         

                                                          Glow wire test equipment      


Test standard:
The tester comforms to IEC6069
5-2-10, UL 746A, GB/T5169.10, GB4706.1

Application:
The glow wire tester heat the stipulated material, Ni80/Cr20, and heating wire, nichrome wire with diameter of 4 mm with high current up to test temperature  550 ℃ ~ 960 ℃. After 1 minute, it burn the specimen verticality for 30s with specified pressure 1.0N. The ignitability of electric and electronic equipments is tested by judging whether the specimen and bedding materials are ignited or deciding the length of burning time; also, the ignitability, ignition temperature(GWIT) , flammability and flammability index of the solid insulating material and some other solid combustible materials are tested in this way.
The glow wire tester is usually applied to the research, production and quality testing departments for electric and electronic products as well as their parts and components, such as lighting equipment, low-voltage apparatus, electric instrument.

Product picture:

iec60695-glow-wire-flame-apparatus-for08579927804.jpg201807191720222484883.jpg

Parameter:

Model BND-ZRS     Glow Wire Test Equipment
Glow wire temperature 500 ~ 1000 ± 2 ℃adjustable
Heating time 0-999.9s ± 0.1s,adjustable (normally choose to 30s)
Ignition timer 0-999.9s ± 0.1s, automatically records, manually suspended
Therm℃ouple Φ0.5mm sheathed K-type therm℃ouple.
Flame extinguish time 0-999.9s ± 0.1s, automatically records, manually suspended
Glow wire Φ4 mm nickel chromium wire.
Hot depth 7mm ± 0.5mm (to maintain the pressure of 1N ± 0.2N hot products into the test)
Sample frame speed about 14mm / s
The pilot background black background.
The pilot pr℃ess automatic testing pr℃edures, independent ventilation
Reference IEC60695-2-10, UL746A,GB/T5169.10-2006
Studio volume 0.5 cubic
Equipment size 1000mm wide × 650mm deep × 1300mm high
Power supply AC220V ± 5%, 50Hz, 0.6KVA


Product feature:
Work conditioning
1) Work temperature is between 5℃ and 40℃.
2) Relative humidity is not more than 85%.
3)Power supply should be AC220V±5%, 50HZ.
4)Use standard electrical outlet. Use 250 Voltage by ten ampere /Three Phase standard electronic outlet and earthing pole needs connect to earth wire.

Temperature of the tip of glow-wire Electric current
550℃ 65A~75A
650℃ 80A~90A
750℃ 95A~105A
850℃ 110A~120A
960℃ 130A~140A


1) After putting the test specimen to the fixture, test specimen could be driven by electronic engine and could go left or right automatically control in the test pr℃ess.

2) Mount glow wire. Test specimen carriage turns right to glow wire with hammer pulling the carriage in order to keep the force within 1 newton. The force shall be maintained at this value when the glow-wire or the test specimen is moved horizontally one toward the other. The penetration of the tip of the glow-wire into the through the test specimen shall be limited to 7mm.
3) Application time that glow wire tip is applied to the test specimen is controlled by numeric relay beforehand.

4) Ignition time is measured by numeric and controlled by button.

5) Flame extinguishing time is measured by numeric relay and controlled by button.

6) Glow wire temperature is controlled by adjusted glow wire current and measured precisely by Temperature controller.

FAQ
1.What about your quality?
Each equipment must be carry out 100% examination and test again before shipping

2.What is the MOQ ?
Most instruments support MOQ one set.

3.How long the delivery time ?
Generally most equipment will be 3-10days after we receive your payment or the order conformed ,please conform with us before you made an order .

4.What is the warranty of the products?
One year ,but we can provide you life long support .

5.What is the package?
Export standard Solid wooden case

6.What is the shipping way ?
We have stable forwarding agent for air and sea transportation ,and also express about DHL TNT etc , we will suggest you the best shipping way base on your requirement .

7.What is the payment term ?
T/T, Western Union,Money gram ,Paypal etc

8.How to contact us ?

Address
Shenzhen Bonad Instrument Co.,Ltd.
(Hong Kong Bonad Technology Limited)
A301 Hongdu Building ,
45 district, Baoan, Shenzhen City,
Guangdong Province 518100,China
Contact Person Rise
Telephone# 86-0755-66608016
Fax# 86-0755-23721200
Email rise@szbonad.com
Mobile Phone# +86 18002516821
Skype 18002516821
Working Hours 8:30~12:00  13:30~18:00 (from Monday to Friday)


About our company

E88GP$E$O4_O){5KK5OI(9B.png



Hot Tags: Glow Wire Test Equipment, China, manufacturers, suppliers, factory, buy, made in China
Inquiry