Building Material Non-combustibility Tester

Building Material Non-combustibility Tester

Building Material Non-combustibility Tester Model# BND-6017 Introduction This fire test apparatus applies to determine the non-combustibility performance of building products under specified tests. Standard ISO 1182 :2002 "Reaction to fire tests for building material-- Non-combustibility...

Send InquiryChat Now
Product Details

Building Material Non-combustibility Tester

Model# BND-6017


Introduction

This fire test apparatus applies to determine the non-combustibility performance of building products under specified tests.


Standard

ISO 1182 :2002 "Reaction to fire tests for building material-- Non-combustibility test"


Application

Building material non-combustibility Tester  is used to verify the non-combustibility performance of certain types of building products, comprised by fire regulations and included in the European Construction Product Regulation, CPR, for example insulation products of mineral wool, fiber reinforced cement, silicate boards, sealing compounds etc.


Test procedure

A test specimen is located inside a cylindrical furnace tube at 750 °C. The furnace and specimen temperatures are measured continuously during the test. Potential combustion of the test specimen is registered as temperature rise and/or visible flames. Mass loss of the test specimen is calculated after the test. These parameters are used to decide if the product is non-combustible or not.


Product Show

image001.jpg


Main Features

1.Adapted 16 bit high precision boards, with computer control and Window XP control system, reasonable structure, stable performance.

2 Test device: heating furnace, specimen holder, air flow cover, thermocouple

3 Modern electronic automation design, adapted the SCR technology to control the temperature inside chamber.

4 Stainless steel inverted cone air stabilizer and round air deflector

5 The temperature rise can be automatically controlled by software. The temperature in chamber can also be controlled.

6 Temperature in chamber: 750°c. Max temperature in chamber: 900°c

7 The temperature average rise in chamber, average temperature rise of specimen surface and average temperature rise of specimen center can be controlled.

8 Observe the average after flame time of specimen, the check the quality loss of specimen.


Technical Parameters

Model No.

BND-6017

Product Name

Non-combustibility  Tests Apparatus for Building Products

Operating Method

Microcomputer automatic control

Settling Time

≤1h from temperature to 750°C

Furnace Temperature

750 ±10°C

Furnace Temperature Drift

≤10°C

Heating Power

800~1000W

Heating Power Voltage

0~100V   adjustable; Electric Current<11A

Voltage Supply

220V±10% ,50Hz ≤5A

Heating Temperature

1250°C

Standards

ISO1182


FAQ

1.What’s your MOQ?
MOQ for most of our products is 1 unit. If you purchase more products, you will get a better price accordingly.


2.Do you have an OEM/OED service?
Yes! Please contact us for details


3.What’s the lead time?
It depends on the product and the qty.
If it is in stock, 3~7 days will be taken. Normally, 1~2 weeks for most products. 4~7 or more weeks will be needed for complex ones.
Please contact us to confirm.


4.What’s your after-sales service policy?
One year warranty and life long tech support.


5.Can I book a factory tour?

Yes. Please contact us to arrange it.



Hot Tags: building material non-combustibility tester, China, manufacturers, suppliers, factory, buy, made in China
Inquiry