Salt Spray Corrosion Test Chamber

ASTM-B117 Salt Spray Corrosion Test Chamber Model#BND-60/90/120 Introduction Salt spray corrosion test chamber, also known as salt fog chamber, salt spray cabinets, salt mist chamber, salt spray tester , where a salt water solution is atomized by means of spray nozzle(s) using pressurized air....

Send InquiryChat Now
Product Details

ASTM-B117 Salt Spray Corrosion Test Chamber

Model#BND-60/90/120


Introduction

Salt spray corrosion test chamber, also known as salt fog chamber, salt spray cabinets, salt mist chamber, salt spray tester , where a salt water solution is atomized by means of spray nozzle(s) using pressurized air. This produces a corrosive environment of dense salt water fog (also referred to as a mist or spray) in the chamber, so that test samples exposed to this environment are subjected to severely corrosive conditions.

The salt-mist chamber which tests corrosion resistance ability of the product, after painting, dope, galvanization, anodic treatment, rust prevention and so on to surface treatments for various materials. It is a corrosion test method which can spray the sodium chloride solution onto coated electroplating by atomizing spurts using in the salt mist testing machine.


Application:

Typical coatings that can be evaluated with this salt mist chamber are:

1.Phosphated (pre-treated) surfaces (with subsequent paint/primer/lacquer/rust preventive)

2.Zinc and zinc-alloy plating (see also electroplating). See ISO 4042 for guidance

3.Electroplated chromium, nickel, copper, tin

4.Coatings not applied electrolytically, such as zinc flake coatings according to ISO 10683

5.Organic coatings, such as rust preventives

6.Paint Coating


Features:

1. 5MM import gray PVC board support rack: ¢ 9.5MMSUS304 inner wall, 3MM stainless steel tube, corrosion-resistant special treatment.

2. V-shaped frame and stainless plastic steel pipe shape, ensure the tested body was at a 30 degree angle bracket.

3. SECC steel channel with angle iron painted, four-wheels can be slid and pushed (limited to 120 or 120 and above models).

4. Intelligent temperature control instrument, pressure tank with 2.0MMSUS201 stainless steel seamless welding.

5. Heating use titanium tube, long life and high resistance to corrosion.

6. 5mm imported cover uses transparent acrylic plate.

7. Spray test chamber is about 35C, spray air barrel is about 47C. Corrosion test chamber is about 50C, corrosion air barrel is about 63C.

8. 5% sodium chloride + 95% purified water.


Structure:

The inner and external shell of the chamber is made from PVC materials; Corrosion resistant, shock resistant, easy launder no leakage phenomenon.

The number display of high-precision temperature control instrumentation, control precision, steady.

Long-term operation will not be permeated out, water airtight structure, no salt spray overflow. (Optional pneumatic rod, not a gas source close Cover effortless.)

Tower (or baffle) spray, salt spray evenly distributed, the settlement of the free adjustment of the nozzle without crystallization, double pressure adjustment and over-temperature protection; continuous cycle spray or optional (at the orders), excluding air compressor (such as customer needs, random configuration).


Note:

The chamber shall be used with air compressor, which is prepared by customers.


Parameter

Model

BND-60

BND-90

BND-120

Inner  size (W*H*D)

600*400*450

900*500*600

1200*500*1000

Exterior size(W*H*D)

1250*1050*910

1550*1210*1060

1900*1400*1300

Temp Range

Inside

Room temp.~50℃, ±0.5℃

Air

Room temp.~63℃, ±0.5℃

Salt water

Room temp.~50℃, ±0.5℃

Saturated Air Pressure

0.8 ~ 2.0(kg/m)

Spray Volume

0.5 ~ 3.0(m/80cm/hr)

PH

Salt

6.5 ~ 7.2

Copper acetate

3.0 ~ 3.2

Exterior/Inner. Material

P.V.C & P.P

System

Salt Spray Vehicle

Air+ acid(base)liquid

Heating

SUS#304 &316 stainless steel heater + talon

Controller

Hydrometer, salinometer, fog collector,glass bar

Other Components

Digital electronic control +S.S.SR

Power supply

AC1220V10%50/60Hz


Product Show

image001.jpg

image003.jpg


FAQ

1.Do you have an OEM/OED service?
Yes! Please contact us for details


2.What’s the lead time?
It depends on the product and the qty.
If it is in stock, 3~7 days will be taken. Normally, 1~2 weeks for most products. 4~7 or more weeks will be needed for complex ones.
Please contact us to confirm.


3.What’s the payment term?
T/T, Western Union, Money gram ,PayPal ,etc .


4.What’s the shipping way?
Via air , sea or express like DHL, UPC, TNT, FedEx and so on.

5.What’s your after-sales service policy?
One year warranty and life long tech support.




Hot Tags: salt spray corrosion test chamber, China, manufacturers, suppliers, factory, buy, made in China
Inquiry