Drip Rain Tester

Drip Rain Tester

IPX1 IPX2 Drip Rain Tester (BND-IPX12C) Test standard: Compliance with IEC60529: 2001 "Degrees of protection provided by enclosures (IP Code)" IEC60529,Figure 3- test device to verify pretection against vertically falling water drops(drip box) Application: The main function of this...

Send InquiryChat Now
Product Details

                                     

                                           IPX1 IPX2 Drip Rain Tester (BND-IPX12C)


Test standard:
Compliance with IEC60529: 2001 "Degrees of protection provided by enclosures (IP Code)"
IEC60529,Figure 3- test device to verify pretection against vertically falling water drops(drip box)


Application:
The main function of this equipment is to test the physical and other related properties of the products in the environment of simulated rain, such as electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and components. After the test, through the test to determine whether the performance of products meet the requirements in order to facilitate product design, improvement, testing and factory inspection.

Product picture:
1537323491(1).jpg

Parameter:

 No.

Model

BND-IPX12C-800

BND-IPX12C-1000

1

Drop of rain area

800*800mm(can customize)

1000*1000mm(can customize)

2

Equipment outer dimensions

L1000*D1000*H2500mm

L1200*D1200*H2500mm

3

Turntable diameter

¢500 mm

¢600 mm

4

Dripping aperture

¢0.4mm.


5

The distance between holes

20*20 mm


6

Rainfall

1-5mm/Min(±0.5mm/min)


7

Flow adjustment mode

manual setting


8

Drop of rain tank lifting height

1000*1800 adjustable


9

Turntable bearing

50KG


10

Turntable Speed

1 r/min


11

Turntable Adjustable Incline

0° or 15°


12

Turntable lifting range

Fixed


13

Testing time

0-999 min


14

Protective device

Leakage, water shortage, short circuit


15

Power (V)

220V


16

Power (KW)

1


17

Standards compliant

IEC60529:1989+A1:1999(IPX1 IPX2)



Product feature:
1: it is suitable for IPX1, IPX2 testing of products.

2: column structure, four columns can be fixed to the ground, smooth operation of equipment to facilitate the overall package of transport, saving on-site installation time.

3: equipment rack, the sample turntable all are made of the high-quality aluminum alloy and SUS304 # stainless steel plate , to ensure long-term use and rustless .

4: drop plank lift: the use of high-quality electric hoist to control the rain plate gently lift.

5: drops of rain board: the use of vacuum design, high-rust stainless steel, durable.

6: drops of rain flow: flowmeter comes with regulating valve, manual precise adjustment.

7: Rainfall device can automatically lift, the nozzle is located in the highest point of 200mm when the test object automatically stops (through the photoelectric switch detection).

8: test needle: diameter 0.4mm, in full compliance with the test standard; removable, easy to replace.

9: Nozzle contact Bit Brass conical design, no need tools to replace the needle; needle below the installation of stainless steel mesh shield, effectively prevent the test operator accidentally hit the head of the test needle was injured.

10: Filtering measures: Equipment standard high-precision filter, can effectively filter impurities in tap water; filter can be replaced regularly.

11: with compressed air-drying function: the test is completed, the drip tank can be excluded from the excess water clean, to avoid long-standing stagnant water and plug the pinhole.

12: turntable motor using stepper motor can be directly set on the touch screen turntable speed; can accurately ensure IPX1 standard requirements turntable speed (1r / min), and can automatically complete the IPX2 test requirements of the four locations were dripping 2.5min Test requirements.


Trading process

FE3HDF(3STPYX3`M8H1[ELH.jpg

FAQ
1.What about your quality?
Each equipment must be carry out 100% examination and test again before shipping

2.What is the MOQ ?
Most instruments support MOQ one set.

3.How long the delivery time ?
Generally most equipment will be 3-10days after we receive your payment or the order conformed ,please conform with us before you made an order .

4.What is the warranty of the products?
One year ,but we can provide you life long support .

5.What is the package?
Export standard Solid wooden case

6.What is the shipping way ?
We have stable forwarding agent for air and sea transportation ,and also express about DHL TNT etc , we will suggest you the best shipping way base on your requirement .

7.What is the payment term ?
T/T, Western Union,Money gram ,Paypal etc

8.How to contact us ?

Address
Shenzhen Bonad Instrument Co.,Ltd.
(Hong Kong Bonad Technology Limited)
A301 Hongdu Building ,
45 district, Baoan, Shenzhen City,
Guangdong Province 518100,China
Contact Person Rise
Telephone# 86-0755-66608016
Fax# 86-0755-23721200
Email rise@szbonad.com
Mobile Phone# +86 18002516821
Skype 18002516821
Working Hours 8:30~12:00  13:30~18:00 (from Monday to Friday)


About our company

E88GP$E$O4_O){5KK5OI(9B.jpg




Hot Tags: Drip Rain Tester, China, manufacturers, suppliers, factory, buy, made in China
Inquiry