Battery Extrusion Testing Machine

Battery Extrusion Testing Machine

The safety performance of the battery is verified by the extrusion test. After the test, the battery should not ignite or explode; it is also an indispensable testing equipment for battery manufacturers and research institutes.

Send InquiryChat Now
Product Details

BND-JY-20KN Battery Extrusion Testing Machine


Product name:

Name: Battery Extrusion Testing Machine

Model: BND-JY-20KN

 

Use:

The safety performance of the battery is verified by the extrusion test. After the test, the battery should not ignite or explode; it is also an indispensable testing equipment for battery manufacturers and research institutes.

 

Experiment method:

1. Extrusion test method:

A: The battery is placed between the two plates for extrusion. The pressing force was applied by a hydraulic head having a piston having a diameter of 32 mm. Squeeze one

The pressure reading up to the hydraulic head reaches 17.2 MPa and the force is approximately 13 KN. Once the maximum pressure is reached

It can be relieved of pressure.

B: The cylindrical ring-shaped battery is to be subjected to extrusion with its longitudinal axis parallel to the plane of the pressing device. The prismatic battery also has to be around its longitudinal

The shaft is rotated 90o so that both the wide side and the narrow side can withstand the squeezing force. Each sample battery is only in one

Pressure in one direction. Different samples are used for each test.

C: coin-type or button-type battery, so that the plane of the battery is pressed against the plane of the extrusion device.

 

Standard basis:

GB 31241-2014, GB/T 8897.4-2008, YD/T 2344.1-2011, GB/T 21966-2008, MT/T 1051-2007, YD 1268-2003, GB/T 19521.11-2005, YDB 032-2009, UL 1642, UL 2054, IEC 62281, IEC 60086, IEC62133 and other related battery standards

 

Features:

5.01. Push-button controller, which can set pressure, hold time, etc.

  5.02. Self-contained lighting system, inner box material is made of resistant combustion material;

5.03. The time can be set, the precision is higher, and the maximum force value is directly displayed;

5.04. It has an exhaust vent (to facilitate the customer to discharge the odor generated in the battery test to the test room);

5.05. Double-layer explosion-proof glass window, explosion-proof box, free-standing controller (easy to operate and safer).

 

Technical Parameters:

  

1

Pressure range

1KN ~ 20KN (adjustable)

2

The diameter of the upper pressure plate

150mm (not less than 20cm2)

3

Force error

1%

4

Unit conversion

Kg/N/Lb (kg / Newton / pound) three units conversion

5

Test power mode

hydraulic

6

Test space

W200 × D200 × H200mm

 

7

Window size

200 × 200mm (10mm thick double-layer explosion-proof glass)

 

8

Exhaust fan port

150mm in diameter (with exhaust fan on the rear side of the cabinet)

 

9

Air supply port:

There are two 50mm

10

Outer box size

W680 × D570 X H1740 (mm)

 

11

The bottom of the box

four universal pulleys underneath, which can move freely

12

Explosion-proof purpose

Prevent battery explosion and injury to people and things around.

13

Lighting

The top of the box is equipped with lights

14

Control box size

W330 × D330 × H1040 (mm)

 

15

Machine weight

about 200Kg

16

Use voltage

AC 380V/50HZ three-phase four-wire + protective ground wire

 

17

Total power:

1.5KW


Battery Extrusion Testing Machine.jpg


Hot Tags: battery extrusion testing machine, China, manufacturers, suppliers, factory, buy, made in China
Inquiry